Stopping Beverage Preparation; Preparing Two Beverages Simultaneously; Permanently Changing Beverage Settings; Changing Default Settings - melitta CI TOUCH Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Changing beverage settings during
preparation
The beverage quantity and the coffee
strength can be changed during beverage
preparation.
Requirement: The appliance is ready for
operation.
During beverage dispensing (coffee
or milk), use the "rotary switch" to
set the respective beverage quantity.
During the grinding process, use the
"Coffee strength" button to set the
coffee strength.
5.7 Stopping beverage
preparation
To stop beverage preparation prematurely,
press the selected direct key again.
5.8 Preparing two beverages
simultaneously
The "2 cups" button is used to pre-
pare two beverages.
Information
Two-cup dispensing is not possible for
beverages mixed with hot water (amer-
icano), for milk froth, warm milk or hot
water.
Fig. 11: Two-cup dispensing
1. Place two vessels beneath the out-
2. Press the "2 cups" button (26).
3. Continue as described for the relevant
ū This setting only applies to the next
ū If a beverage is not prepared within
6
The appliance offers further options for
preparing coffee specialities.

6.1 Changing default settings

Depending on the beverage, the following
default settings can be changed:
Coffee amount, amount of froth, milk
amount, hot water amount, coffee
strength and temperature.
Changing the beverage settings is similar
for all beverages. Changing the coffee
strength for an Espresso is described here
as an example.
1. Press the "rotary switch" for 2 seconds.
2. Navigate to the
26
3. Select the desired coffee strength and
8
4. Select the Exit command to exit the
»
The default settings remain valid until they
are changed again.

Permanently changing beverage settings

let (8).
beverage preparation.
Information
beverage preparation.
1 minute, the appliance switches to
single-cup dispensing.
Permanently changing
beverage settings
»
The menu appears on the display.
Direct keys > Espresso > Coffee strength
menu.
confirm your selection.
menu.
The selected coffee strength is used the
next time an espresso is prepared.
Information
41

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ci touch f630-102

Tabla de contenido