ARDEA ONE CL200x-38 Manual De Instrucciones página 35

16.12 Twenty-four spoke rear tyres (CLA231)
16.13 Headrest kit (CLA243)
16.14 Backrest extension kit (CLA244)
16.15 Radial brake kit (CLA241)
Remove the rear wheels by pressing the quick-release button, remove
the pins and reinsert them in the holes on the frame of the replacement
wheel, checking that they are properly inserted.
N.B. If original spare parts are used, the wheel pins are compatible with
all MORETTI S.p.A. models.
Remove the padded cover of the backrest and the elastic strap
protective cover. Remove the upper elastic strap and adjust the height
of the backrest until the second upper hole on the backrest tube is
visible. Reposition the upper elastic strap and fix it in position, together
with the two headrest supports. Replace the elastic strap protective
cover and the padded cover of the backrest in position. Insert the
attachment bar of the headrest into the holes on the supports just
mounted. Insert the headrest tube, adjust it to the desired height and
tighten the lever.
Remove the padded cover of the backrest and the elastic strap
protective cover. Remove the upper elastic strap and adjust the height
of the backrest until the second upper hole on the backrest tube is
visible. Reposition the upper elastic strap and fix it in position, together
with the two backrest extension supports. Replace the elastic strap
protective cover and the padded cover of the backrest in position.
Insert the extension into the holes on the supports just mounted.
Remove the standard parking brakes by loosening the clamp attached
to the frame. Insert the radial parking brake support in the same
position. Before tightening the screws, adjust the inclination and depth
of the parking brake to the right position for good braking.
15