Publicidad
Idiomas disponibles
Idiomas disponibles
SANARIUM C
5.
Operation
Programs:
Sauna temperature:
1
Individual program
2
80 °C
3
90 °C
4
95 °C
Prerequisite/note for the operation described below:
d
The control unit is in standby mode. The time appears in the display.
.
The selected program starts automatically three seconds after the last press of a button.
5.4.
Starting sauna operation
RISK OF FIRE!
Before operating the control unit, always make sure that there are no combustible
objects on or near the sauna heater.
1.
Press the B button.
.
The operating mode selected most recently and its settings appear in the display.
2.
If necessary press the B button again until SAUNA appears in the display.
'
If other values are to be used for the selected program - see Chapter 6.
Or:
3.
Select the desired sauna program using the up/down
.
Each further press of the button displays the next sauna program.
4.
Start sauna operation using the
.
At the end of the heating phase the bathing visitor
ready for bathing.
5070188/07.02
Button:
SANARIUM temperature:
1
Individual program
2
50 °C
3
55 °C
4
60 °C
5
70 °C
button.
Description:
A Cabin light button
B Operating mode button
C Left/Right buttons
D Up/Down buttons
E OK button
Humidity
Individual program
approx. 35 g/m
approx. 50 g/m
approx. 70 g/m
approx. 70 g/m
buttons.
symbol appears in the display. The sauna is
3
3
3
3
PAGE 11
Publicidad
