Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Operation
Programs:
Sauna temperature:
1
Individual program
2
80 °C
3
90 °C
4
95 °C
Prerequisite/note for the operation described below:
d
The control unit is in standby mode. The time appears in the display.
.
The selected program starts automatically three seconds after the last press of a button.
5.5.
Starting SANARIUM operation
RISK OF FIRE!
Before operating the control unit, always make sure that there are no combustible
objects on or near the sauna heater.
'
Put the evaporator into operation as described in 5.8.
1.
Press the B button.
.
The operating mode selected most recently and its settings appear in the display.
2.
If necessary, press the B button again until SANARIUM appears in the display.
'
If the values for the selected program are to be changed - see Chapter 6.
Or:
3.
Select the desired SANARIUM program using the up/down
.
Each further press of the button displays the next SANARIUM program.
4.
Start SANARIUM operation using the
.
At the end of the heating phase the bathing visitor
SANARIUM is ready for bathing.
PAGE 12
Button:
SANARIUM temperature:
1
Individual program
2
50 °C
3
55 °C
4
60 °C
5
70 °C
button.
Description:
A Cabin light button
B Operating mode button
C Left/Right buttons
D Up/Down buttons
E OK button
Humidity
Individual program
approx. 35 g/m
approx. 50 g/m
approx. 70 g/m
approx. 70 g/m
buttons.
symbol appears in the display. The
SANARIUM C
3
3
3
3
5070188/07.02
Publicidad
