Klafs SANARIUM C Instrucciones De Operación página 15

SANARIUM C
5. Operation
5.8. Starting up the evaporator
Filling the SANARIUM C evaporator
Fill in the quantity of water for the
intended bathing duration.
Filling volume of max. 4 litres.
Do not add any additives to the water.
1. Close the drain cock (1) – position the drain cock
crossways.
2. Take the scent bowl (2) off the evaporator
container.
3. Fill the evaporator with water at the filling unit (2).
Fill the SANARIUM C scent into the scent bowl
The scent bowl is still hot immediately
after bathing operation.
Protect your fingers and hands against
burns.
1. Take the scent bowl (2) off the evaporator
container (3).
Risk of fire!
Do not fill the scent bowl on the heater.
2. Fill the scent bowl with diluted scent.
3. Put the scent bowl (2) back on the evaporator
container (3).
5070188/07.02
2
2
3
1
3 3
PAGE 15