blink indicating a top up. Press the 'Dose'
button to start the grind and it will dose the
right amount to get the ideal level.
NOTE
• This feature is only available on 'Auto' mode.
• This feature may require 2 to 3 top up cycles
to reach an ideal dose.
• The set auto grind time will not be affected
by this feature.
• Machine will not start a top up with an over
dose or ideal level. Remove the portafilter and
trim the excess with the razor.
Over Dose (Trimming the Dose)
Razor
the
Precision dose trimming tool
The Razor
precision dose trimming tool
™
allows you to trim the puck to the right level
for a consistent extraction.
Insert the Razor
into the coffee basket until
™
the shoulders of the tool rest on the rim of the
filter basket. The blade of the dosing tool should
penetrate the surface of the tamped coffee.
Rotate the Razor
dosing tool back and forth
™
while holding the portafilter on an angle over
the knock box to trim off excess coffee.
™
Manual Dosing
AUTO
MANUAL DOSE
Press the 'Manual Dose' button to switch
to manual dose mode. The light around the
Manual Dose Dial and the Manual light
will illuminate when in manual mode.
Select the dose amount by turning the dial
clockwise for more or counterclockwise for
less grind time.
Grinder Purge
It is recommended to purge the retained grinds
left in the burrs or chute prior to making the
first coffee of the day. Old grinds may affect
the in-cup quality and coffee taste. Purging will
ensure only fresh coffee makes it into your cup.
To purge, press and hold the 'Dose' button. The
grind will start after 0.5 seconds, and it will
stop once the 'Dose' button is released.
In auto mode, after doing a purge it is required
to remove the portafilter, discard the grind
from the basket and re-insert the portafilter
into the grinding cradle to return the machine
to its standby mode.
MANUAL
17
EN