Descargar Imprimir esta página

Breville the Barista Express Impress Manual De Instrucciones página 29

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
PROBLEM
The machine is on
but ceases to operate
Water does not flow
from the group head
No hot water
Grinder time out
Grinding for a
very long time
Will not grind
/ grind stops
Pressure Gauge is
not working
Auto time
not adjusting
Dose level is
not updating
POSSIBLE CAUSES
Machine is too hot.
Machine has not reached
operating temperature.
Water tank is empty.
Water tank is not fully inserted
and locked into position.
Water tank is empty.
The coffee grind is very fine.
Chute is blocked.
Out of beans.
Hopper not locked (dose light
flashing back and forth).
Portafilter not fully inserted in
the grinding cradle.
Lever is too low and the tamp
blocks the chute.
Coffee build-up stopping
portafilter insertion.
Incorrect dose or not enough
coffee in the filter basket.
Using coffee beans beyond
expiry date.
Machine in 'Manual' mode.
In 'Top-up' mode.
Machine in 'Manual' mode.
WHAT TO DO
Turn machine off. Wait for 30-60 minutes and
turn machine back on. If problem persists, call
Breville Consumer Support.
Allow time for the machine to reach operating
temperature.
Fill water tank.
Push water tank in fully and lock latch closed.
Fill water tank.
Clean out grinder using provided cleaning
tool. Refer to page 26 'Cleaning Conical Burrs'.
Clean chute using provided cleaning brush.
Refer to page 26 'Cleaning Conical Burrs'.
Add more beans.
Lock hopper.
Fully insert the portafilter and see the 'DOSE'
light button illuminates.
Raise lever fully to home position.
Clean grinding cradle with brush.
Use dual wall baskets or use a finer grind
size setting. If problem persist, call Breville
Consumer Support.
Use freshly roasted coffee beans with a
'Roasted On' date and consume between
5-20 days after that date.
Press the manual dose dial to return to
auto mode.
Do not remove the portafilter until grind has
completed and ideal dose is reached.
Press the manual dose dial to return to auto
mode. Refer to page 16 'Dosing Modes'.
EN
29

Publicidad

loading