Emos P56201UF Manual De Instrucciones página 12

Installing the Thermostat (see Fig. B)
Attention:
Before changing the thermostat, disconnect the heating system from the mains power
in your flat. This will prevent potential injury by electric current.
Placement of the Thermostat
The placement of the thermostat significantly affects its functioning. Choose a location
where members of the family spend most of their time, preferably on the inside wall
where air circulates freely, with no direct sunlight. Do not place the thermostat in the
vicinity of heat sources (such as TV sets, radiators, fridges), or close to a door (due
to frequent shocks or vibrations). If you do not follow these recommendations, the
thermostat will not maintain room temperature correctly.
1. Use a screwdriver to press on the internal lock and slide out the metal frame. If
necessary, carefully disconnect the internal connector joining the two parts of
the thermostat together.
2. Install the mounting plate onto a suitable junction box, e.g. KU 68.
3. Connect the wires leading out of the junction box to the marked terminals on
the thermostat in accordance with the wiring diagram. Reconnect the internal
connector, fit the thermostat back onto the mounting plate and secure it with
the metal frame.
4. Replace the front cover.
Wiring Diagram (see Fig. C)
LOAD – connected device
N, L – thermostat's power supply
NTC – floor sensor
Instructions for Connecting the Thermostat to a Mobile Device
In order to connect the thermostat to your mobile device, you need the EMOS GoSmart
app. The app is available for download on Google Play (for Android) or App Store (for iOS).
Before connecting, make sure you are connected to a Wi-Fi network with 2.4 GHz frequency.
5 GHz networks are not supported.
12