Emos P56201UF Manual De Instrucciones página 14

Time periods can be set in the Weekly Mode Settings tab in the EMOS GoSmart app.
For each time period, set the temperature that should be set on the thermostat from
the time you specify in time period settings. The temperature you have set will be
active until the next time period.
Example: If you set the time periods in accordance with the table below, the temper-
ature in the room will be set to 16 °C from 3:00 to 6:00, then 20 °C from 6:00 to 9:00,
17 °C from 9:00 to 12:00, 19 °C from 12:00 to 14:00, 23 °C from 14:00 to 22:00 and
17 °C from 22:00 to 3:00.
1st time period
2nd time period
3rd time period
4th time period
5th time period
6th time period
Advanced Settings
Temperature Calibration
• The temperature sensor in the thermostat is calibrated from production, but
additional calibration can be done to optimise the thermostat further, for instance
by comparing the measured room temperature with a reference thermometer.
• Example: The thermostat shows room temperature of 22 °C; setting calibration
to +1 °C will cause the thermostat to display 23 °C instead.
• Calibration can be set in EMOS GoSmart in a range of -9 °C to 9 °C with 1 °C
resolution.
Temperature Differential
• The temperature differential (hysteresis) is the difference in temperature required
for switching the system on and off.
3:00
6:00
9:00
12:00
14:00
22:00
14
16 °C
20 °C
17 °C
19 °C
23 °C
17 °C