Emos P56201UF Manual De Instrucciones página 20

• AB – Setting the limit of the sensor's high-temperature protection
• Can be set to between 1 °C and 9 °C.
• The default setting is 2 °C.
• AC – Open Window function (temperature)
• Can be set to between 10 °C and 20 °C or turned off completely.
• The function is turned off by setting the value to 10 °C and pressing the
arrow. Two dashes will appear on the screen.
• The default setting is off.
• AD – Open window function (interval)
• Can be set to between 10 and 20 minutes.
• The default value is 10 minutes.
• AE – Reset
• Ao is shown on the screen. To reset to factory settings, hold the
for 5 seconds.
Setting B Modes and Functions on an Inactive Thermostat Screen
Turn off the thermostat screen using the
bottom bar of buttons is active.
To access the thermostat's advanced settings (B), press and hold the
3 seconds.
Adjust values/parameters in any mode or function using the
To navigate in advanced settings, press
mode. The functions/modes are marked as BN, Bo (in the top right corner of the screen).
Confirm any values you set by pressing
Functions/Modes:
• BN – Active temperature sensor
• Can be set to N1, N2 and N3.
• N1 = internal sensor is active.
• N2 = floor sensor is active.
• N3 = internal and floor sensor is active.
• The default value is N1.
button. When the screen is off, only the
to access the settings for the next function/
.
20
button
button for
and arrows.