Publicidad
Idiomas disponibles
Idiomas disponibles
1) Graphic signs used in this manual
1.1)
1.2)
1.3)
1.4)
1.5)
2) Product description
I Fuse 60 or 105 is a Multipurpose Electrofusion Control Unit (ECU) capable of delivering to electrofusion fittings the energy
required to carry out the fusion. This device controls with a frequency of 4 times per second, that all the electrical parameters are
in agreement between themselves and coherent with those indicated by the manufacturer of electrofusion fittings. I Fuse 60 or 105
works with fusion fittings like "electrofusion" made of polyethylene, PE80, PE100, PE-X and PP. I Fuse 60 or 105 can be used at
ambient temperature within the range -10; + 45 °C / 14; 113 °F. Utilization beyond these limits must be agreed in advance with our
technical department.
ECU automatically sets correct fusion parameters by Scanner/Optical Wand reading or manual introduction of Bar Code visible on
the couplers (according to ISO13950 ). In case couplers do not show Bar Code, it is possible to manually introduce Voltage and
Fusion Time recommended by fitting's manufacturer.
I Fuse 60 or 105 has an internal memory for storage of fusion parameters (electrical parameters, time, fittings features, etc.). It is
also possible to print out Fusion Data and download them to a PC for further processing and/or integration in proper Data Base.
Any use not mentioned in this manual is not allowed.
3) General warnings
Read all warnings and technical information. Otherwise you can being involved in accidents at the workplace. Follow all indications
for health and safety at work.
3.1) Workplace warnings
a) Keep the workplace clean and well lighted. Untidiness and darkness increase the possibility of accidents.
b) Do not use machine in explosive atmosphere, such as in the presence of flammable liquids, gases or dusts. Under
certain conditions, ECU may produce an electrical arc which could cause a fire.
c) Keep children and unauthorized people away.
3.2) Electric current warning
a) Electrical tools' plugs should be placed properly into the sockets. Never modify plug on this ECU. Unmodified plugs and
sockets reduce the risk of electrical shock.
b) Avoid contact between people and pipes, radiators, ovens and refrigerators. There is a high risk of electrical shock if
your body is in close contact with the elements mentioned before.
c) Avoid exposing to rain and water in general ECU. Contact with water increases risk of electrical shock.
general hazard
electric shock risk
prohibition
obligation
using face protection
Pag. 6/50
Publicidad
