MioMat Classic Manual De Instrucciones página 6

English
Troubleshooting
PROBLEM
The ingredients
were not sufficiently
ground.
The soup is very
watery.
The machine
doesn't work and the
indicator light does
not light.
The machine heats,
but doesn't grind.
The machine turned
off without finishing
the program.
Milk overflows
The machine is
steaming.
If the machine stops working, please check these possible causes and solutions before
taking the appliance to your distributor.
For more information please visit www.miomat.eu
POSSIBLE CAUSES
Too many ingredients.
Too little water.
Thickening ingredients are
missing.
The plug is not connected
properly.
Failure to the adapter.
The lid is not connected well to
the top of the appliance.
Failure to the base.
Motor damage.
Too much food.
The ingredients got burned
and stuck to the bottom of the
appliance from having too many
ingredients in it or too little water.
You didn't wear a grinding ring
You used processed food
Normal cooking process.
POSSIBLE SOLUTION
Use recommended measurements.
Add water up to
1100 - 1300 ml. range.
Add a cup of grains or legumes. You
can also add thicker vegetables such
as potatoes, zucchini.
Firmly connect
the plug.
Contact the distributor.
Place the lid to the jar correctly.
Contact the distributor.
Let the machine cool down. Make sure
you have the correct amount of food
(up to the 1100 ml line).
Empty the appliance, and allow it to
cool. Remove the stuck-on food with a
soft sponge and soft cleanser. Use the
appliance as normal with ingredients
and measurements indicated in
the recipe book. Always use more
water than dry ingredients. Do not
use previously cooked or processed
ingredients.
For milks always use grinding ring
Add only raw foods without previous
processes
6 6