Bosch FWA 4630 Manual Original página 40

en | 40 | FWA 4630 | Operation
4 .15 Fitting/removing brake clamp
Fig. 23: Fitting the brake clamp
i
Ensure proper attachment to prevent damage to the
seat and steering wheel. Place a cloth underneath if
necessary.
i
After run-out compensation, fit the brake clamp for
further measurements.
|
1 690 706 005 2011-05-11
4 .16 Fitting/removing steering wheel
arrester
The steering wheel arrester fixes the steering wheel in
position and blocks the wheels
1. Place the steering wheel arrester on the seat and
press the plate into the seat.
2. Slide the arms upwards against the steering wheel.
3. Release the plate so that pressure is exerted on the
steering wheel by way of the seat cushion.
4. Remove in the reverse order of fitting.
Fig. 24: Steering wheel arrester
i
Ensure proper attachment to prevent damage to the
seat and steering wheel. Place a cloth underneath if
necessary.
Robert Bosch GmbH