Tilt-Out Door Basket; Durabase; Durabase Divider; Pullout Drawer - Sears Kenmore 795.7160 Serie Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TILT-OUT
DOOR
BASKET
To remove
basket
1. Pull one of the brackets
upward.
2. Remove
basket from both brackets.
DURABASE
DIVIDER
The Durabase
divider
allows you to organize
the
Durabase
area into sections.
To replace
basket
1. Insert bracket
into one side. Hook end of basket
into bracket.
2. Hook other basket end into other bracket.
Push
bracket down into place.
3. Be sure back of basket goes behind retention
tab
on each bracket.
• , WARNING:
If the Durabase
divider
is removed,
there is enough open space for children
or pets to
crawl inside.
To prevent accidental
child and pet entrapment
or
suffocation
risk, DO NOT allow them to go near or
touch the freezer drawer.
PULLOUT
DRAWER
To remove
the drawer,
push in the tabs (1) on both
sides of the drawer
and lift up on the front (2) and
pull it straight
out (3).
DURABASE
1. To remove
the Durabase,
push it to the back as
much as possible.
Tilt up the front of the Durabase
and pull straight
out.
2. To install,
insert the Durabase
into the rail
assembly.
To install the drawer,
pull out both rails to their full
extension,
raise the front of the drawer
up and align
the gears on the back of the drawer to rail assembly.
Gently push down on the front of the drawer
until the
tabs on each side snap into place.
24

Publicidad

Tabla de contenido
loading

Tabla de contenido