Diono Radian 3R Manual De Instrucciones página 37

F. HARNESS TIGHTENING
Prior to installing the car seat into your
vehicle, follow these steps to
set up harness.
1. To loosen harness push down on
silver harness release and pull
shoulder straps forward.
2. Unfasten chest clip and harness
buckle, and move harness straps
to the sides.
3. Properaly position child in
car seat, all the way back and
sitting upright.
4. Position harness straps around
the child and fasten buckle
with harness pad positioned
between the buckle and the
child. Gently tug on harness
strap to make sure straps are
securly buckled.
FIRST SETUP
diono.com
1
4
2
37