Diono Radian 3R Manual De Instrucciones página 60

10. Tighten the top tether
strap to remove the slack.
There should not be any extra
tension on the top tether. Do
not push on the car seat back
while tightening. Compressing
the car seat into the vehicle
seat might reslult in a top
tether that is too tight. Store
any excess webbing so it does
not become a safety hazard.
11. To remove LATCH/UAS strap
from vehicle use the LATCH/
UAS red release straps on the
LATCH/UAS connectors and
pull them off the anchor bars.
12. To loosen or remove the top
tether, push in on the grey
button to loosen, then unclip
the top tether.
60
FORWARD–FACING
10
11