5. Place car seat forward-facing in back
seat of the vehicle. Center the car
seat between the vehicle LATCH/UAS
anchors. The entire seat bottom should
sit flat on the vehicle seat. If overhang
is present refer to page 55.
6. Loosely attach tether strap.
Do not tighten. Consult your
vehicle owner's manual
for specific tether anchor
locations.
7. Attach LATCH/UAS connectors to
vehicle's LATCH/UAS anchors and
listen for audible "click" to confirm
engagement. LATCH/UAS strap
should lie flat and not be twisted.
58
FORWARD–FACING
5
7