Diono Radian 3R Manual De Instrucciones página 50

on the shoulder belt while feeding the slack back into
the retractor.
OR
B. LAP BELT
To tighten, press down
firmly in the center of the
car seat with one hand
while tightening the lap
belt strap with the other
hand. You may need to
tighten further by pulling
in-line with the belt path.
5. Test for tightness. Grab
the seat at the bottom of
the rear-facing belt path.
Try to move the car seat
side-to-side and front-to-
back with the force of a firm
handshake. If the seat moves
less than 1 in (2.5 cm), it is
tight enough.
by grasping the top or back
of the car seat. Only check
by grabbing
belt path opening.
50
REAR–FACING
DO NOT test
rear-facing
4
5