Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the tray holder runners
Adjust the runners spacing according to the size of the
trays.
A
C
E
G
UN41-0067CF
Proceed as outlined below.
1) Unscrew the bolts (A).
2) Remove the tray holder runner (B).
3) Unscrew the bolt (C) and remove the part (D).
4) Unscrew the bolts (E) and remove the tray holder
runner (F).
5) Unscrew the bolts (G) and remove the part (H).
English language
ADJUSTMENT INFORMATION
There must be enough clearance between the runners
and the tray to allow the tray to be inserted and removed
without having to slide it along the runners.
6) Position the runners (according to required height
and spacing) so that the existing holes in the up-
rights (L) can be used for fastening purposes.
7) Screw the bolts (A) and (E).
8) Fit the parts (D) and (H).
9) Screw the bolts (C) and (G).
10) Adjust the clearance (see "Adjusting the clearance
between the runners and the trays").
20
A
D
C
E
H
G
Use and maintenance
5
Publicidad
