Publicidad
Idiomas disponibles
Idiomas disponibles
Safety advice concerning replacements
When replacing worn or damaged parts, original
spares must always be used.
Special maintenance operations (non included in
this handbook) require a specialised workshop on
Replacing the drive chain
C
UN41 0060CF
Proceed as outlined below.
1) Unscrew the screws (A) and remove the casing (B).
Replacing the transmission chain
UN41 0061CF
Proceed as outlined below.
1) Unscrew the nuts (A).
2) Remove the casing (B).
3) Remove the joining link (C).
4) Remove the chain (D).
English language
INFORMATION CONCERNING REPLACEMENTS
D
the premises which meets the requirements speci-
fied by the relative laws in force (appropriate equip-
ment suitably trained staff etc.); if you do not have a
compliant workshop, contact an authorised one.
2) Move the tensioner (C) and remove the chain (D).
3) Fit a new chain.
4) Fit the casing (B) and tighten the screws (A).
A
5) Fit the new chain on the pinions and on the chain
tensioner.
6) Remove the joining link (C).
7) Fit the casing (B).
8) Tighten the nuts (A).
31
8
B
A
B
Use and maintenance
Publicidad
