Publicidad
Idiomas disponibles
Idiomas disponibles
A
L
UN41-0906UA
- For unhitching, proceed as outlined below.
1) Select an area with flat, solid ground to park the work
vehicle - tractor.
2) Using the tractor's controls, lower the work vehicle to
the ground.
3) Lower the resting foot (N), insert pin (M) and lock pin
Seat positioning
Poor work posture will tire the operator
and could lead to mistakes being made;
therefore, before starting work, adjust
the seat and secure it in the position that
offers maximum comfort.
Proceed as outlined below.
1) Loosen the nuts (A) and adjust the
seat height.
2) Tighten the nuts to secure the seat in
the right position.
3) Using the lever (B) to move the seat
towards or away from the dispenser.
4) Use the lever (C) to tilt the seat.
Carry out the same procedure to adjust
the other planting units installed.
English language
INFORMATION FOR USE
A
M
N
UN41-0907UA
G
E
(L).
4) Switch off the tractor engine and remove the ignition
key from the dashboard.
5) Take out the lock pin (H) and remove the pin (G).
6) Remove the safety pins (D) and the pins (C).
C
21
6
H
F
D
B
C
B
A
Use and maintenance
Publicidad
