Magneti Marelli Vision Guida Rapida página 29

WARNINGS
1. To avoid damages to the sw in the instrument internal card,
always switch off the instrument by clicking on the switch-off
button on the top right hand side of the screen
software stops you can switch the instrument off by holding
depressed the switch-on button for more than 5 seconds.
2. In case of an incorrect switch-off, the instrument will run a scan
disk upon switch-on lasting approx. 10 minutes to check for any
malfunction of the memory card. Do not abort this operation for
any reason whatsoever.
3. It is recommended to monthly update the diagnostics
software in the Memory Card. To do this, you must use the
instrument password.
4. OK functions strictly follow the manufacturer's instructions,
allowing performance of the required operations correctly, simply
and safely.
If you carefully comply with the displayed instructions, NO function
will interfere with other electronic components. Therefore they are
SAFE and can NOT damage the vehicle.
5. Instrument must be connected to vehicles as follows:
a. Connect the diagnostics cable to the instrument
b. Connect the diagnostics cable to the vehicle
E N G L I S H
E N G L I S H
. If the