Magneti Marelli Vision Guida Rapida página 35

SERIAL DIAGNOSIS and ROAD TEST (Analysis chart)
1. From the main page, select the type of vehicle
2. Choose the "Make" and, in sequence, year, model, type (fig.
3).
3. These choices can be made from this page. The top menu
features the following functions:
 "System selection" that allows performing the serial
diagnostics
 "Ok Function"
 "Vehicle scanning"
 "Connector and cable position"
In the bottom menu:
 "borescope" function
 "system selection" function
 test graph function (road test)
 oscilloscope function
 multimeter function
 function of last choices made.
1. Select Autodiagnosis or Analysis chart, depending on what
you want to do: analyse the ECU or check vehicle engineering
parameters trend in time and live reading.
2. Using the indicated cable, connect the instrument to vehicle
connector located where shown(Use "Cable connector
position"). Switch ignition key to on and confirm when the
instrument requires it.
3. The instrument communicates with the vehicle. If there are
faults on the vehicle, icon will flash.