Publicidad
Idiomas disponibles
Idiomas disponibles
E031002B
pins connected to the stretching eyelet of the
bands. Symmetrically operate on the right pin
inside the right shoulder and on the one inside the
left shoulder, in order to stretch the bands in the
same way.
Replacement of the nomex bands. Take the
upper protection off. Open the two side panels of
the machine and unscrew the pins connected to
the stretching eyelet of the bands. After having
completely loosen the old bands, slide them away
and replace them one by one with the new ones.
Close the new bands, with the nomex thread,
above the introduction roll. Pinch one of the metal
hook at the end of the band to avoid withdrawing
of the nomex thread. Remember to introduce the
bands in the right direction (nomex texture
towards the outside, covering of the conjunction
in the same direction of the roller direction).
Eventually stretch the ironing bands.
Replacement of the belts detaching the linen.
Take the upper protection and replace the
mentioned belts by knotting them. Do not stretch
too much.
If the chromed roll needs to be cleaned, use a
brass brush.
16. GAS BURNER CLEANING (for gas-working
drying ironer)
Any ordinary or extraordinary maintenance must
be performed by qualified staff. Open the left side
with its key. Take the exhausting regulator off,
loosen the junction and the supporting screws.
Take the burner off and start cleaning the external
surface using a cloth. Check that the holes are
not obstructed. In case of partial or total
obstruction clean them properly. IMPORTANT: do
not use screwdrivers or sharp tools which may
cause damage to the internal components.
17. EXPLODED VIEW AND SPARE PARTS
To consult the exploded views and find out the
spare parts, please see the manufacturer's site,
inside the technical area. Before entering the web
site check the serial number of the machine and
its production period.
18. SCRAPPING
When a machine cannot work anymore, you have
to scrap it in conformity of current legislation,
separating metal parts, plastic and glass parts.
19. WARRANTY
Please, refer to IMESA official price list for all the
warranty condition.
Starting
from
the
includes:
shipment
date,
warranty
In order to benefit from the manufacturer's
warranty the owner has to completely
comply with the instructions of this
manual and in particular he has to:
operate
machine usage limits;
perform an accurate and regular
maintenance;
permit the use of the machine
only to trained people;
make use of original spare parts
as
specifications.
18
10/03/06
in
accordance
with
per
manufacturer's
Publicidad
