Publicidad
Idiomas disponibles
Idiomas disponibles
2) Move the microswitch in direction (2) to spray ear-
lier.
- Move the microswitch in direction (1) to spray later.
3) Tighten the knob (A).
- If repositioning the microswitch is not sufficient,
reposition the nozzle.
Proceed as outlined below.
1) Loosen the screws (B).
2) Move the nozzle in the direction required to activate
the spray correctly.
3) Tighten the screws (B).
- Carry out the same procedure to adjust the other
planting units installed.
Adjusting the flow onto the seedlings
Proceed as outlined below.
1) Turn the tap (B) to simultaneously adjust the flow to
all the planting units.
Consider whether to further adjust each individual
planting unit.
To do this, proceed as described below.
1) Loosen the knob (A).
2) Move the microswitch in direction (1) to increase the
spraying time.
Move the microswitch in direction (2) to decrease
the spraying time.
3) Tighten the knob (A).
- Carry out the same procedure to adjust the other
planting units installed.
Tank position adjustment
CAUTION
To facilitate activities, carry out this
procedure with the tank empty.
Adjust the position of the tank to prevent
it colliding with the cab or other obsta-
cles.
Proceed as outlined below.
1) Loosen the nut (A).
2) Loosen the nut on the opposite sup-
port.
3) Unscrew the nuts (B).
4) Remove the screws (C).
English language
ADJUSTMENT INFORMATION
1
UN41-0929UA
1
2
UN41-0930UA
UN41-0931UA
7
A
2
B
A
B
A
5
B
C
Use and maintenance
Publicidad
