Descargar Imprimir esta página

myBlend myLEDmask Manual De Instrucciones página 35

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 66
STEP 7: End your myLEDmask facial/ Turn off the
device
Your LED mask will automatically turn off at the end of
your facial.
You may interrupt the session at any time by pressing
the Start / Stop & Resume program button
two seconds.
If you pause for more than 30 seconds by pressing the
If you pause for more than 30 seconds by pressing the
Start / Stop & Resume program button
light will blink slowly for 30 seconds and the mask will
light will blink slowly for 30 seconds and the mask will
automatically be reprogrammed to Phototype 1.
If you pause for more than 60 seconds, the device will
If you pause for more than 60 seconds, the device will
automatically turn off for safety reasons. It is preferable
automatically turn off for safety reasons. It is preferable
not to stop a facial in progress.
STEP 8: CLEAN YOUR LED MASK
At the end of each session, clean your myLEDmask and place it in its storage case with
the charger.
Clean the mask's inside face and neck surfaces that are in contact with the skin using a
fresh individual hand wipe or an alcohol-based solution (70% concentration).
DO NOT USE ANY other cleaning products, which might damage the plastic.
9.0 FREQUENCY AND USAGE CYCLE
A complete cycle consists in several sessions spaced at least 48 hours apart, and lasts
for six to eight consecutive weeks. This cycle may be repeated with a one-month pause
between each cycle. These recommendations are in line with our clinical studies.
10.0 CARE & MAINTENANCE
Using the mask for any purpose other than that described in this manual is prohibited
and will result in the automatic cancellation of the warranty.
Should any problems arise, contact our After-Sales Service or your retailer.
Any modifi cation to the device will automatically render the warranty null and void.
11.0 DISPOSAL
Disposal concerns either the entire product at the end of its lifecycle, or parts that have
become defective or damaged over time.
At the end of its lifecycle, the device must be disposed of in compliance with the
regulations regarding waste management in force in the country in question. Feel free
to contact myBlend if you have any questions about the applicable regulations.
The device contains plastic, mechanical and electronic components as well as a battery.
for
for
, the indicator
, the indicator
User Manual Version No. 800866-EN01
myLEDmask
User Manual
35

Publicidad

loading