Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL CONNECTIONS
Check that the power supply voltage, frequency and power of the installation are compatible with the values indicated
both in the technical characteristics and on the nameplate at the back of the oven.
The characteristics of the power outlet must be compatible with the plug installed on the cable.
THE ELECTRICAL CONNECTION OF THE OVEN TO THE ELECTRICAL NETWORK MUST BE MANDATORY
AND EXCLUSIVELY PERFORMED BY AN APPROVED TECHNICIAN (ELECTRICIAN) WHO HAS THE
TECHNICAL-PROFESSIONAL REQUIREMENTS REQUIRED BY THE REGULATIONS IN FORCE IN THE
COUNTRY IN WHICH THE OVEN IS USED, WHO MUST ISSUE A DECLARATION OF CONFORMITY OF
THE WORK.
FOR DIRECT CONNECTION TO THE MAINS, IT IS NECESSARY TO PROVIDE A DEVICE WITH AN
OPENING BETWEEN THE CONTACTS SO AS TO ENSURE COMPLETE DISCONNECTION UNDER
CATEGORY III OVERVOLTAGE CONDITIONS, IN ACCORDANCE WITH THE INSTALLATION RULES.
To connect the machine to the power supply, proceed as follows:
connect a standardized and polarized plug to the other end of the cable (the distinction between phase and
neutral must be clear).
WHEN THE ELECTRICAL CONNECTION IS COMPLETE, THE APPROVED TECHNICIAN (ELECTRICIAN)
MUST ISSUE A DECLARATION CERTIFYING THE CONTINUITY MEASUREMENT OF THE
EQUIPOTENTIAL PROTECTION CIRCUIT.
THE APPLIANCE MUST BE CONNECTED THROUGH A RCD WITH A MINIMUM RATED TRIP CURRENT
NOT EXCEEDING 30 MA.
7
Publicidad
