Casselin CFRPC43 Manual De Instrucciones página 44

CONFIGURING PARAMETERS
TEMP BUTTON (2)
When this key is pressed, the parameter to be configured starts flashing in the order:
- UPPER TEMPERATURE SETPOINT
- LOWER TEMPERATURE SETPOINT
- TAPE SPEED
On the third press, you exit the configuration and confirm the parameters set. You can also exit and confirm
without going through all the parameters by pressing the ENTER key or waiting a few seconds.
The configurations are then always saved automatically.
MENU KEY (3)
By pressing the key, you enter the menu with the list of items:
- PROGRAMS
- SCHEDULE
- DATE HOUR
- TAPE DIRECTION
- LANGUAGE
- MAINTENANCE MENU
- EXIT
Navigation is done using the arrows (KEYS 5 and 6), to enter the corresponding section, press the ENTER key, to
exit the menu go to the exit section and press ENTER.
ENTER KEY (4)
It has the function of confirming the selected parameter, without any selection on the main screen it can start or
stop the tape.
If in parameter or menu configuration, the parameter is saved.
RIGHT ARROW KEY (5)
Navigation to the right by scrolling the programs on the line of the main screen, if in the configuration of the
parameters, increases the value or selects the next item.
LEFT ARROW KEY (6)
Navigation to the left by scrolling the programs on line of the main screen, if in the configuration of the
parameters, decreases the value or selects the previous item.
ON/OFF BUTTON (7)
Turns the card on or puts it to sleep when turned on.
PROGRAM SELECTION ON THE MAIN SCREEN
The main screen presents the programs as follows:
The empty box indicates that
the program used is the manual
one.
Note on the navigation keys: when they are pressed on the main screen, a first press fills the frame of the program
used, a second press moves the frame to be able to
select another program.
The program used is 3. When the program is selected
using the navigation arrows (5 and
6), the frame becomes full.
After 5 seconds, the program is
automatically activated.
You can also confirm by pressing the
ENTER key.
14