EN
There are two pedals, left and right.
Turning counterclockwise is to tighten the left pedal, and turning counterclockwise is to loosen the
right pedal. Some of the pedals may be difficult to install, this is normal.
Caution: the pedal is very important, so it must be turned tightly with a large wrench, or the pedals,
crankset and chainring could be damaged.
WARNING: Leaning the front wheel at your toes can cause you to lose control and fall. Consult
your dealer to determine if your combination of frame size, crank length, pedal type, and shoes will
result in the front wheel resting on your toes. Whether or not it rests, it is strongly recommended that
you hold the outer pedal in the lowest position and the inner pedal in the uppermost position during
sharp turns.
10. Normal seat tube: first fix the saddle.
WARNING: Driving with a loose seat bracket may allow the seat to rotate or shift, causing you to
lose control and fall. Therefore: 1. Consult your dealer to make sure you know how to properly
tighten the seat post. 2. Understand and apply the correct technique for tightening the seat bracket
mechanism. 3. Before riding the wheel, first check that the seat peg is securely fastened.
6
INSTALLING THE PEDALS
SCHEME OF THE SADDLE
11. See picture.
The point for attaching the
integrated luggage rack