SICK WSE16 Manual De Instrucciones página 27

2 Safety information
2.1 General safety notes
2.2 Notes on UL approval
2.3 Intended use
3 Product description
3.1 Operating and status indicators
8020353.1GI9/2022-07-13 | SICK
Subject to change without notice
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
The device shall be supplied from an isolating transformer having a secondary overcur‐
rent protective device that complies with UL 248 to be installed in the field rated either:
a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or
b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).
Alternatively, they can be supplied from a Class 2 power supply.
UL Environmental Rating: Enclosure type 1
The WSE16 is an opto-electronic through-beam photoelectric sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A sender (WS) and a receiver (WE) are required for operation. If the product is
used for any other purpose or modified in any way, any warranty claim against SICK AG
shall become void.
WSO16x-xxxxxxA0 WEO16x-xxxxxx00
3
3
OPERATING INSTRUCTIONS
WEO16x-xxxxxx01
5
1
1
2 3 2
O P E R A T I N G I N S T R U C T I O N S | WSE16
WEO16x-xxxxxx02
4
1
3 2
27
en