SICK WSE16 Manual De Instrucciones página 30

OPERATING INSTRUCTIONS
5 Electrical installation
en
30 O P E R A T I N G I N S T R U C T I O N S | WSE16
Dimensions in mm (inch)
1,000
(39.37)
500
(19.69)
0
–500
(–19.69)
–1,000
(–39.37) 0 10 20 30
(32.81) (65.62) (98.43) (131.23)
Recommended sensing range for the best
performance
Figure 4: WSE16G light spot size
Note the sensor's maximum permissible tightening torque of < 1,3 Nm.
The sensors must be connected in a voltage-free state. The following information must
be observed, depending on the connection type:
– Male connector connection: Note pin assignment.
– Cable: wire color
Only supply/switch on the voltage once all electrical connections have been estab‐
lished.
Explanations on connection diagram:
Alarm = alarm output
Health = alarm output
MF (pin 2 configuration) = external input, teach-in, switching signal
Q /C = switching output, IO-Link communication
L1
Test = test input
U : 10 ... 30 V DC
B
40 50 60
(164.04) (196.85)
Distance in m (feet)
2 20 60
(6.56) (65.62) (196.85)
8020353.1GI9/2022-07-13 | SICK
Subject to change without notice