Hansgrohe Rainfinity 250 3jet 262321 Serie Instrucciones De Montaje / Manejo / Garantía página 2

English
Technical Information
Flow rate
26232XX1
26235XX1
Installation Considerations
• For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly before
beginning installation. Make sure that you have all
tools and supplies needed to complete the installation.
• This unit requires iBox Universal Plus rough 01850181
(not included).
• The rough must be installed and the finished wall
surface must be complete and made watertight before
installation of this unit.
This unit must be installed with Quattro
Green diverter rough 15936181 (included).
Please refer to the installation instructions included
with the rough. The trim kit for the Quattro Green is
sold separately.
• The Quattro Green insures that the flow rate of the
showerhead does not exceed 2.5 GPM. It does not
permit the use of two functions at once.
2
2.5 GPM (9.5 L/min)
1.75 GPM (6.6 L/min)
• There are no controls on the Rainfinity 250 3jet. The
spray functions are controlled by the Quattro Green
diverter.
• To prevent scald injury, the maximum output temperature
of the shower mixing valve (not included) must be no
higher than 120°F (49°C). In Massachusetts, the
maximum output temperature can be no higher than
112°F. (44°C)
• 26232XX1 only: This showerhead is for use with
automatic compensating valves rated at 2.0 GPM
(7.6 L/min) or less.
• 26235XX1 only: This showerhead is for use with
automatic compensating valves rated at 1.3 GPM
(4.9 L/min) or less.
• Keep this booklet and the receipt (or other proof of
date and place of purchase) for this product in a safe
place. The receipt is required should it be necessary to
request warranty parts.