To Use With Your Ins Device; Cleaning Your Programmer; Disposal Of Your Programmer; Environmental Conditions For Storage And Operation - Axium MN20600-02 Manual Del Usuario

To Use with Your INS Device

Cleaning your Programmer

To clean your Programmer, wipe carefully with a damp – but not wet – soft cloth. Do not get the
Programmer wet. Always follow the Precautions listed above. They instruct you not to wash the
Programmer or TNS. Excess water may keep them from working properly.

Disposal of your Programmer

Return your Programmer and your TNS to your doctor at the end of the trial period or when no longer
being used. Do not discard or burn the TNS or Programmer. Fire may cause the internal batteries to
explode. Do not attempt to dispose of the TNS or Programmer yourself.

Environmental Conditions for Storage and Operation

Storage Temperature/Humidity: -10°C to 50°C (14°F to 122°F) at relative humidity up to 93%
Storage Altitude: 700 hPa to 1060 hPa
Operating Temperature/Humidity: 5°C to 40°C at relative humidity from 15% to 93%
Operating Altitude: 700 hPa to 1060 hPa
To connect your Programmer to your INS, push the "Connect" button
on the Programmer. Move the Programmer magnet over the implant
location in a circular motion. The Programmer will chime when
connection is made. You may then use the Programmer to adjust
your stimulation settings.
16