Ardea mobility Tiboda TB030X Manual De Instrucciones página 57

1 Before you couple the device to the wheelchair, make sure that the battery's power button is set
to OFF (Ref. A - Fig. 3)
2 Align your wheelchair with the drive (Fig.4)
3 Grasp the handlebar and pull the Tiboda towards yourself, until its mounting is resting on the top
pin of the bracket mounted to the wheelchair
Fig.5
4 Press the handlebar downwards and pull the TIBODA towards your (Fig.5), until the first pin (Ref.
1 - Fig. 6) fits into the quick mounting
5 Push the handlebar forwards (to rotate it as shown in Fig.6) while moving your body back, until
the quick mounting engages with the second pin (Rif.2 - Fig.6).
The front wheels of the wheelchair are now raised off the ground
6 Set the battery's power button to ON
7 The Tiboda is now ready to go
9.4 Uncoupling
Fig.7
13
Fig.6