Ivoclar digital PrograPrint Cure Guía Breve página 12

f Do not open the curing chamber whilst a program is in operation.
f Always place the build platform or object tray on the designated turntable.
f To avoid the risk of electric shock, ensure that no liquids or objects enter the
ventilation slots.
f To prevent damage to the device and a reduction of the device performance, observe
the cleaning requirements and cycles (see "Cleaning by the user", page 12 in these
Short Instructions as well as the overview and instructions for the cleaning and
maintenance work in the Operating Instructions, "Documents of equal applicability
and required files", page 5).
f Only operate the device unsupervised if the operating conditions for unsupervised
operation described below are fulfilled.
Unsupervised operation:
The device may be operated unsupervised, provided the national and local laws and
provisions allow for such action and provided that they are observed. Furthermore, the
requirements of the respective insurance company must be met.
f Never use the device if the curing chamber is heavily soiled.
f Protect the device against unauthorized access.
2.8.4 Cleaning by the user
f Only clean as specified in the Operating Instructions and observe the related safety
regulations (see overview and requirements regarding cleaning and maintenance
work in the Operating Instructions, "Documents of equal applicability and required
files", page 5).
12
2.8.5 Improper maintenance, modifications and repairs
Improper service and improper repairs or modifications will endanger patients and users
and result in damage to the device and the final products.
Should you carry out any repairs or maintenance of the device or make modifications or
remove the housing without prior written consent by an authorized service partner, all
warranty claims are void.
Unauthorized opening and removal of components can expose voltage-carrying
components. The plugs may also be under voltage. There is a risk of electric shock!
f Maintenance as well as repairs of damaged safety equipment or machine parts must
only be carried out by a service partner authorized by Ivoclar.
3. Additional information
– Download link Operating Instructions PrograPrint System:
https://www.ivoclar.com/prograprint-manual