Ivoclar digital PrograPrint Cure Guía Breve página 6

2. Safety
WARNING! Improper use of the device.
Hazard to the user.
f The safety chapter contains important information on the safety of the
device: Please read it thoroughly prior to installation and operation.
The device is built according to state-of-the-art technology and recognized
safety regulations. Nevertheless, operation bears the risk of injury to the
user or third parties. Moreover, impairments of the device and other
property are possible.
2.1. Intended use
PrograPrint Cure has been designed for use in dental technology for curing and post-
curing of the following materials:
– PrograPrint materials and approved materials from other manufacturers
– Light-curing dental laboratory composites (e.g. SR Nexco)
– Light-curing dental laboratory materials
Use the PrograMill Cure exclusively for this purpose.
In the case of damage caused by improper use or failure to observe the Operating
Instructions, all liability and guarantee claims are void.
Please note that only the materials and cleaning agents approved by the manufacturer
ensure processing without damage to the machine.
All information regarding material and indication extensions corresponds to
the state of knowledge at the time of going to print.
For additional details, go to http://www.ivoclar.com.
The Ivoclar Download Center is available at
https://downloadcenter.ivoclar.com/#lang=en
The post-curing of non-approved 3D printed materials from other
manufacturers is not recommended due to the lack of coordination with
the printing/fabrication process.
6
2.1.1 Potential improper use
The device is not suitable for post-curing procedures outside of the dental field.
The following is considered as misuse of the system:
– Non-compliance with the specified intended use, intended operator specifications or
intended environment
– Modifications, maintenance and repairs without prior authorization from Ivoclar
– Operation with inappropriate parameters
Improper use of the device can lead to the following:
– Danger for patients and operating personnel
– Impairment of the operability of the device
Ivoclar assumes no liability for damages resulting from improper use.
Typical misapplications of the device to be avoided:
Improper use
Post-curing of non-approved materials
Post-curing of printed appliances and
objects in an articulator
Post-curing of non-dental objects
Incorrect cleaning and disposal
Consequences
Insufficient material properties in terms
of mechanics, colour, precision,
biocompatibility
– Articulator does not fit into the
chamber, door cannot be closed
– Device cannot be used
– Damage to the device
Insufficient material properties in terms
of mechanics, colour, precision,
biocompatibility due to different volume,
weight, layer thicknesses, materials, etc.
of the objects
– Skin irritations
– Environmental damage
– Damage to the device