CADstar CS.Neo2 Manual De Instrucciones página 9

3. Device overview and connections
3.1 Components of the scanner
These are the main components in the scanner
No. Description
1 Connector strip (rear side)
2 Swivel bracket
3 Housing
4 Optical scan unit
5 Model support (CS.Neo2 Max = two support)
6 On/Off button
3.2 Scanner connector strip
The connector strip is located on the back of the scanner and is designed as follows:
No. Description
1 24V DC power supply socket
2 USB C 3.0 Port Master Unit
3 USB C 3.0 Port Slave Unit (CS.Neo2 Max only)
EN / 8
The power supply unit may only be connected to a socket with protective contact
The cables should be laid along walls
2
1
24V
Master
USB 3.0 USB 3.0
3
4
5
6