Publicidad
Idiomas disponibles
Idiomas disponibles
Transport safety
•
Use an approved transport vehicle for transportation
of the product.
•
A markets national or local regulations can set limit
to the transportation of the product.
•
The operator of the transport vehicle is responsible
to attach the product safely during transport. Refer
To safely attach the product for transportation on
to
page 35 .
Battery safety
WARNING:
cause an explosion and cause injury. If the
battery has a deformation or is damaged,
speak to an approved Husqvarna service
agent.
WARNING:
instructions that follow before you use the
product.
•
Use protective glasses when you are near batteries.
•
Do not wear watches, jewelry or other metal objects
near the battery.
•
Keep the battery out of reach for children.
•
Charge the battery in a space with good airflow.
•
Keep flammable materials at a minimum clearance
of 1 m when you charge the battery.
•
Discard replaced batteries. See
37 .
•
Explosive gases can come from the battery. Do not
smoke near the battery. Keep the battery away from
open flames and sparks.
Safety instructions for maintenance
WARNING:
can cause injury or damage to property or
the adjacent area. Do not do maintenance
on the engine or the cutting deck without
these conditions:
•
The engine is off.
•
The product is parked on a level surface.
•
The parking brake is applied.
•
The ignition key is removed.
Introduction
WARNING:
safety chapter before you assemble the
product.
12
A damaged battery can
Read the warning
Disposal on page
The product is heavy and
Assembly
Read and understand the
•
The cutting deck is disengaged.
•
The ignition cables are removed from the
plugs.
WARNING:
the engine contain carbon monoxide, an
odourless, poisonous and very dangerous
gas. Do not run the product in closed spaces
or spaces with not sufficient air flow.
WARNING:
instructions that follow before you use the
product.
•
For best performance and safety, do maintenance
on the product regularly as given in the maintenance
Maintenance schedule on page
schedule. Refer to
19 .
•
Electrical shocks can cause injuries. Do not touch
the cables when the engine is on. Do not do a
function test on the ignition system with your fingers.
•
Do not start the engine if the protective covers are
removed. There is a high risk of injury caused by
moving or hot parts.
•
Let the product become cool before you do
maintenance near the engine.
•
The blades are sharp and can cause cuts. Wind
protection around the blades or use protective
gloves when you do work on the blades.
•
Do not park the product near the edge of a ditch or
slope to get access to the cutting deck.
CAUTION:
instructions that follow before you use the
product.
•
Do not turn over the engine if the spark plug or
ignition cable is removed.
•
Make sure that all nuts and bolts are tightened
correctly and that the equipment is in good condition.
•
Do not change the adjustment of governors. If the
engine speed is too high, the product components
can become damaged. Refer to
page 38 for highest permitted engine speed.
•
The product is approved only with the equipment
supplied or recommended by the manufacturer.
The exhaust fumes from
Read the warning
Read the caution
Technical data on
1825 - 003 - 08.02.2023
Publicidad
