Publicidad
Idiomas disponibles
Idiomas disponibles
1. Park the product in the center of the load area.
CAUTION:
transport vehicles with a cover, let the
product become cool before you put it
below the cover.
2. Make sure that the center of gravity of the product
is above the wheel axle of the transport vehicle. If a
trailer is used for transportation, make sure that the
vertical force on the tow bar is correct.
3. Apply the parking brake.
4. Remove all loose objects.
5. Attach the first strap to the tow bar.
6. Tighten the strap rearward to attach the product to
the load area.
36
For transportation in
7. Put the second strap around the front axle.
8. Attach the strap to the load area.
9. Tighten the strap in the direction of the front of the
load area to attach the product to the load area.
10. Put the chocks in front of and behind the rear
wheels.
Storage
Prepare the product for storage at the end of the
season, and before more than 30 days of storage. If
you keep fuel in the fuel tank for 30 days or more, tacky
particles can cause blockage in the carburetor. This has
a negative effect on the engine function.
To prevent tacky particles during storage, add a
stabilizer. If alkylate gasoline is used, stabilizer is not
necessary. If you use standard gasoline, do not change
to alkylate gasoline. This can cause sensitive rubber
parts to become hard. Add stabilizer to the fuel in the
tank or in the container used for storage. Always use the
mixing ratios given by the manufacturer. Run the engine
for a minimum of 10 minutes after you add the stabilizer
until it flows into the carburetor.
WARNING:
with fuel in the tank in an indoor location or
in locations with bad airflow. Risk of fire if
fuel fumes come near open flames, sparks,
or pilot lights in for example boilers, hot
water tanks and clothes dryers.
WARNING:
other flammable materials from the product
Do not keep the product
Remove grass, leaves and
1825 - 003 - 08.02.2023
Publicidad
