Hella Gutmann CSC-Kit Radar III Manual De Instrucciones página 33

Hella Gutmann
5. Working with the Radar Kit III
5.1. Preconditions for the Use
Ensure the following to be able to use the Radar Kit III:
• The vehicle system to be adjusted is working properly.
• There are no trouble codes stored in the ECU.
• Vehicle-specific preparations have been done.
• Rear axle track is correctly adjusted.
• The horizontal alignment of the vehicle on even floor is ensured.
• The Rear Cam Kit I Basic (if necessary with positioning aid) is present (not included in the delivery contents).
• Two wheel alignment modules are present (not included in the delivery contents).
• The radar reflector CSC 4-04 / CSC 4-05 / CSC 4-07 is positioned correctly in front of/behind the vehicle.
• The minimum dimensions indicated in the diagnostic device regarding the correct positioning have been obeyed.
• The note given in the diagnostic device regarding the areas in which reflecting objects shall not be present has been
obeyed.
NOTICE
The mounting direction of the radar reflector CSC 4-07 is specified in the diagnostic device.
5.2. Adjusting the Front Radar
5.2.1. Attaching the Wheel Clamp Modules to the Rear Wheels
Proceed as follows to attach the wheel alignment module to the rear wheel:
1. Attach one wheel alignment module on the left and right rear wheel respectively.
CSC-Kit Radar III
Working with the Radar Kit III | 5.
33