Selco WF 109 Instrucciones De Uso página 33

The parameters of the main screen can be personalised (consult
the "Interface personalisation" section).
3 Functions
Allow the setting of the most important process func-
tions and welding methods.
3a
Allows access to the quick choice menu (and
exit from it) - (consult the "Quick choice menu"
section)
3b Allows the selection of the welding process
MMA
ARC AIR
TIG
MIG/MAG
Pulsed MIG/MAG
3c Allows the selection of the welding method
2 Stages
4 Stages
Crater filler
Spot welding
Pause point
Automation and robotics
3d
Gas test
3.7 Quick choice menu
Allows the selection and regulation of the most commonly used
welding parameters.
Enter the quick choice menu by pressing button (1)
Select the required parameter by rotating the encoder to bring
it within the central quadrant (2).
The value and the unit of measurement of the selected param-
eter are shown alongside (3).
Activate the regulation of the selected parameter by pressing the
encoder button.
3a Parameter selection bars
Adjust the value of the selected parameter by rotating the encoder.
Confirm the change made by pressing the encoder button.
Exit the quick choice menu by pressing button (1).
PROCESS QUICK CHOICE MENU
MMA
ARC AIR
TIG
MIG/MAG
Pulsed MIG/MAG
The parameters of the quick choice menu can be personalised
(consult the "Interface personalisation" section).
The activation of functions different from the default ones
changes the number and the type of parameters in the quick
choice menu.
.
33