Sagola HTV 250 Manual De Instrucciones página 28

Fluid pressure scheme
MODEL RATIO
HTV
25:1
250
Equipment identification
The equipment is provided with the manufacturer's identification plate, shown in the picture
below. For no reason must the plate be removed, even if the equipment must be re-sold. For
any communication with the Sagola always refer to the serial number written on the plate itself.
an Elcometer company
Urartea 6, 01010 Vitoria. Made in Spain
05. Components
1 Suction Probe (Fig. 2)
2 Product return hose (Fig. 2)
3 Product return key (Fig. 2)
4 Pressure Regulator (Pump) (Fig. 2)
5 Pressure Regulator (Gun) (Fig. 2)
6 Product Outlet (Fig. 1)
7 Pressure Gauge (Pump) (Fig. 2)
8 Pressure Gauge (Gun) (Fig. 2)
9 Air inlet (Fig. 2)
10 Product inlet (Fig. 1)
11 Vertical bellow (Fig. 1)
Air inlet pressure
3 bar/ 43.5 psi / 0.3 MPa
5 bar/ 72 psi / 0.5 MPa
7 bar/ 102 psi / 0.7 MPa
Mod.
Nº Serie
ENGLISH
Product outlet pressure
75.5 bar/ 1,095 psi / 7.5 MPa
126 bar/ 1,827 psi / 12.6 MPa
176 bar / 2,553 psi / 17.6 MPa
11
Fig.01
10
6