Sagola HTV 250 Manual De Instrucciones página 46

19. Declaration of conformity
Manufacturer:
Address:
Hereby declares that the product: PNEUMATIC PUMPS
Brand:
Product line:
CE Conformity declaration
Is in conformity with the provisions of the CE Directive on machines (Directive 2006/42/CEE),
including the amendments to it and the related transposition into the National Law 1644/2008.
Is in conformity with the requirements of the following European Directives:
ATEX regulation (Directive 2014/34/CE)
Marked "X" All static electricity is discharged by the air ducts.
Air hoses should be "ANTISTATIC" as well as its modifications and updates, and provisions accor-
ding to the national legislative code of the destination country.
Is in conformity with the requirements of the following European Standard Directives, and has used
the following technical standards for its construction:
UNE-EN ISO 12100:2012
UNE-EN ISO 4414:2011
components"
UNE-EN ISO 14120:2016
tion of fixed and movable guards".
UNE-EN ISO 1127-1:2012
UKCA Conformity declaration
Is in conformity with the provisions of the Directive on machines (Directive
2008 No. 1597).
Is in conformity with the requirements of the following British Directives:
ATEX regulation (Directive 2016 No1107) II 2G x
Marked "X" All static electricity is discharged by the air ducts.
Air hoses should be "ANTISTATIC" as well as its modifications and updates, and provisions accor-
ding to the national legislative code of the destination country.
Is in conformity with the requirements of the following British Standard Directives, and has used the
following technical standards for its construction:
BS EN ISO 12100:2010
BS EN ISO 4414:2010
components".
BS EN ISO 14120:2015
of fixed and movable guards".
BS EN ISO 1127-1:2019
Complete technical documentation and product service instructions are available in the original
version, as well as in the community languages of the users.
In Vitoria-Gasteiz on 01/11/2022
SAGOLA, S.A.U.
Urartea, 6 • 01010 VITORIA-GASTEIZ (Álava) SPAIN
SAGOLA
HTV 250
"Safety of machinery - General principles for design - Risk assessment and risk reduction."
"Pneumatic fluid power - General rules and safety requirements for systems and their
"Safety of machinery - Guards - General requirements for the design and construc-
"Explosive atmospheres - Explosion prevention and protection"
"Safety of machinery - General principles for design - Risk assessment and risk reduction."
"Pneumatic fluid power - General rules and safety requirements for systems and their
"Safety of machinery - Guards - General requirements for the design and construction
"Explosive atmospheres - Explosion prevention and protection"
Signed:
ENGLISH
II 2G x
Enrique Sánchez Uriondo
Technical Manager