Sagola HTV 250 Manual De Instrucciones página 32

8.4 Classification according to the ATEX directive
The machine conforms to the essential requisites of the EU Directive 2014/34/UE, better
known as ATEX ("Explosive atmospheres"). It is classified as group II category 3 letter G system.
The assessment procedures of conformity, carried out by an internal factory check, allow the
installation of the machine in surroundings where there may be potentially explosive atmospheres
due to the presence of gas, fumes or mist.
8.5 Equipment assembly
Main line of
compressed air
Product
Air
YOU MUST ALWAYS CONNECT THE EQUIPMENT AND ALL THE
ELEMENTS INVOLVED IN THE WORK PROCESS TO A GROUNDING
CONNECTION TO ELIMINATE STATIC ELECTRICITY.
09. Start up
Before each start-up and especially after cleaning or repairing the unit, a check must be made
that all its elements are securely tightened.
Ground the equipment, as well as the hoses, the containers
to be used and the objects to be painted.
Always place the equipment at least 6 metres away from
the product application area.
The first time you use your equipment there is no need
to depressurise it, as it is already supplied in a totally
depressurised state, though it will be necessary to do this
each time any maintenance or repair work is carried out.
Should this safety measure not be observed, this may
lead to malfunctions, personal injury and accidents,
which may prove to be fatal. SAGOLA S.A.U. does not
accept any responsibility for the consequences of any
non-compliance with these safety regulations.
ENGLISH
Product
tank
Absorption probe (suction)