Sagola HTV 250 Manual De Instrucciones página 31

Idiomas disponibles

30/31

Technical advantages

1.- PNEUMATIC CYLINDER. MACHINED AND

ANODISED ALUMINIUM. High resistance to

corrosion and wear.

2.- OVERSIZED AIR DISTRIBUTION ZONE. To avoid

freezing problems and maintain smooth operation

without loss of performance and with minimum air

consumption.

3.- PNEUMATIC SHAFT. GROUND AND CHROME-

PLATED. Long life shafts.

4.- HYDRAULIC SHAFT. HARDENED AND

CHROMED. Great durability and wearing resistance.

5.- BELLOWS SYSTEM. Completely eliminates

packing gland and increases the life of your

conventional equipment by a factor of 5. No

lubrication is required in the shaft area.

6.- HYDRAULIC CYLINDER with ANTI-OXIDANT

treatment. Ideal for waterborne products.

7.- OVERSIZED VALVES. They provide a better flow

of material, a reduction in product flow speed and

consequently less wear and tear.

08. Installation

INCORRECT INSTALLATION OF THE MACHINE MAY CAUSE DAMAGE TO

PEOPLE, ANIMALS OR OBJECTS. THE MANUFACTURER CAN NOT BE

CONSIDERED RESPONSIBLE FOR THESE DAMAGES.

8.1 Transport and discharge

The equipment is delivered packaged. It must be transported and stored according to the

indications on the packaging. Due to the low weight of the remover can be moved by two people

without using other means.

8.2 Arrangement of the lighting system

The client must make sure that there is suitable lighting for the surroundings and that the lighting

conforms to the regulations in force. In particular, the client must arrange the positioning of

lighting that illuminates all the working area.

8.3 Arrangement of the pneumatic system

The client must arrange a line of filtered compressed air supplied by a compressor that is

suitable for the consumption required. Do not use compressed air that contains chemical

products, synthetic oil with organic solvents, salts or corrosive gases as they can cause damage

or malfunctioning. The line of compressed air must arrive up to the supply points of the machine.

If the compressed air contains a large amount of moisture, it may cause malfunctioning in the

valves and in the pneumatic components. Install a moisture separator downstream from the

compressor to avoid this.

ENGLISH