VALBERG UF NF 280 F X701T Instrucciones De Uso página 26

C
Food storage
Errors
The freezer makes a warning sound when the temperature reaches inappropriate levels or when
a problem occurs on the appliance. In this case, a warning code appears on the screen.
Type of Meaning
error
E01
E02
E03 Sensor warning
E06
E07
E08 Low voltage
warning
E09 The freezer
is not cold
enough.
Practical information
Cause
This warning
appears when
the power supply
drops below 170 V.
This malfunction
can occur
following a long
power cut.
19
Corrective action
Contact a technician as soon as
possible to get help.
- This warning does not indicate that
the appliance needs repair. The error
allows you to avoid damaging the
compressor.
- It is then recommended to increase
the voltage to the required level.
If this warning continues, contact a
technician as soon as possible to get
help.
1. Adjust the freezer temperature to a
colder setting or enable Super Freeze.
It will then be possible to delete
the error code once the required
temperature is reached. Keep doors
closed to reduce the time needed to
reach the right temperature.
2. Remove all thawed food when this
error occurs. It must be used as soon
as possible.
3. Do not add fresh food to the freezer
as long as the error continues and
the correct temperature has not been
reached.
If this warning continues, contact a
technician as soon as possible to get
help.
EN