Insert in the
socket
Clean any dust
Do not modify
Care when
cleaning
Do not freeze
Insert the power plug securely into the socket.
If the cable is not properly inserted, it may cause
a fire due to electrical leakage or the heat
generation.
Clean accumulated dust or dirt from the power
line plug.
Accumulated dust or dirt can lead to a fire,
electric shock or short circuit.
Do not disassemble, remodel, modify or repair
the water purifier.
This may result in fire, electric shock or
breakdown and cause injury. If a repair is
required, please contact the seller of your water
purifier.
Do not place anything on top of the water
purifier. Can cause fire, electric shock or injuries.
Do not use abrasive or harsh cleaners such as
window sprays, scouring cleansers, inflammable
liquids, cleaning waxes, concentrated
detergents, bleaches or cleaners containing
petroleum products on plastic parts. Do not use
paper towels, scouring pads or other aggressive
cleaning utensils These may scratch or damage
the materials.
Do not freeze. May cause leaks or other
malfunctions. The filters of the reverse osmosis
membrane are damaged below 0°C.
Do not use this product with microbiologically
unsafe water or with water of unknown origin or
quality.
Do not connect the product to water inlets with
a temperature below 40°F (4.4°C) or above 100°F
(38°C).
The required working pressure of the product is
14-100 psi. If the water pressure is lower or higher,
install a pressure booster or a pressure relief
device.
38
EN