Coral OSMOSIS H600 Manual De Instrucciones página 53

SECTION 2: TAP DISPLAY
LED tap indicator
1. If the life of the filter is not over: Open the tap. If the blue light stays on, you can
drink the water directly. If the blue light flashes, wait for a while and do not use the
reverse osmosis system until the light stays on without flashing.
2. When the filter is nearing the end of its useful life (15 days or 60 gallons remaining),
every time you turn on the faucet, the red light will flash for 5 seconds. Then follow
the same procedure as in step 1.
3. When the filter reaches the end of its service life, the red light will remain on.
4. Within 5 seconds of switching on the equipment, the red light will light up for 2
seconds and the blue light will light up for 3 seconds.
5. After 5 seconds of switching on, the filter life at all levels does not reach the state
of completion of water production, the blue tap light turns on for a period of time
and the red tap light turns off.
6. 5 seconds after switching on, in the water production state the blue tap light is
off, the red tap light is on. After 5 seconds, the blue tap light turns off and the red
tap light turns off in other states.
Water quality
indicator
53
Blue light on
Normal mode
Red light followed by
blue light
(every time the tap
is opened)
Upcoming filter
change próximo
Red light on
Breakdown or imminent
filter replacement
EN