Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2: INSTALLATION OF FITTINGS
NOTE
If there is no hole in your kitchen sink or countertop, you need to drill a hole (13/8).
1. Insert the tap stem and the power cable into the mounting washer.
2. Insert the tap stem and power cable into the hole in the countertop. Fix the
mounting washer 1 on the countertop.
3. Under the sink, place mounting washers 2 and 3 on the tap stem. Fit the nut and
tighten it.
4. Insert one end of the blue 1/4" PE pipe into the quick-connect fitting on the tap
and fit the locking clip on the fitting.
Mounting washer 1
NOTE
Please use the larger black mounting washer. You won't need the smallest one.
Faucet body
Faucet stem
Quick connect fitting
Mounting washer 2
Nut
Mounting washer 2
48
Faucet spout
Mounting washer 1
Countertop
Faucet power cord
Mounting washer 3
Outlet water pipe
Mounting washer 3
EN
Publicidad
