Coral OSMOSIS H600 Manual De Instrucciones página 40

For inspection and maintenance
WARNING
Cannot be
dismantled or
repaired without
permission
Prohibited
Disconnect the
power connector
Instructions
Do not connect the hot water inlet to the
water purifier,It will damage the reverse
osmosis membrane.
If there is a water leak from the water
philtres, unplug the power cable
immediately and close the water valve.
Replace all filters regularly. The filter life
LED flashes when the filters need to be
replaced.
See page 5 for general "Intervals for filter
replacement".
Do not install near strong magnetic Devices.
The installation and removal of the water
purifier must be carried out by a qualified
plumbing professional.
It is normal for there to be a slight noise
and vibration when the water purifier is
producing water.
Normal sounds: vibration, circulating water
inside the device.
If the power cable of the water purifier
is damaged, it must be replaced by the
manufacturer or a service agent.
Do not clean the water purifier with high
pressure water equipment. fire due to
deterioration of the insulation.
Before cleaning the water purifier, unplug
the power cord from the socket
Unplug the power cord immediately and
call for service if you smell anything or
hear any abnormal sounds.
coming from the water purifier.
40
EN